Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Nanoscale ; 15(28): 11955-11962, 2023 Jul 20.
Artigo em Inglês | MEDLINE | ID: mdl-37395091

RESUMO

WTe2, as a member of Weyl semimetals, is a vital candidate for the development of broad-wavelength-range photodetectors. At present, the preparation of WTe2 films mainly depends on the chemical vapor deposition (CVD) method. However, the chemical reactivity between W and Te is low, and the controllable synthesis of large-sized layered WTe2 in a stoichiometric ratio is the main challenge for further research. Here, we propose a salt-assisted double-tube CVD method for the one-step preparation of high-quality and large-size WTe2 crystals with a monolayer and few layers. The thickness and lateral dimension of WTe2 crystals can be effectively tuned by the growth temperature and hydrogen concentration, and the dynamic growth mechanism is understood by the combination of surface reaction and mass transport. Furthermore, a high-performance photodetector based on WTe2 is fabricated, which has high responsivity of 118 mA W-1 (1550 nm) and 408 mA W-1 (2700 nm) at room temperature, indicating its great potential for application in infrared optoelectronic devices. The results provide a reference for the preparation of 2D materials by CVD and lay the foundation for the fabrication of next-generation optoelectronic devices with a wide-wavelength-range response.

2.
Inorg Chem ; 61(27): 10609-10617, 2022 Jul 11.
Artigo em Inglês | MEDLINE | ID: mdl-35758888

RESUMO

Due to the highly acidic and high-salinity nature of the high-level radioactive waste liquid (HLLW), selective extraction of TcO4- from HLLW remains to be a challenging task. Traditional anion exchangers show low selectivity and unsatisfactory extraction performance due to the lack of functional groups that can interact strongly with TcO4-. In this work, a tailor-made binding site was constructed by decorating two acetamide functional groups on imidazolium cation to fabricate a new Tc separation material, which exhibits high selectivity. Unlike most reported Tc separation materials, which can only perform well under low acidic, neutral, or alkaline conditions, this material still has good extraction performance in highly acidic solutions. In the simulated high-level waste liquid of 3 M nitric acid, the extraction efficiency of 0.5 mol/L organic phase for Tc can reach 96.5% through the first-stage extraction. Our theoretical simulations suggest that ReO4-/TcO4- anions were adsorbed on the top of the imidazolium ring during the extraction process, with p-π and p-p interactions acting as the driving forces.

3.
Materials (Basel) ; 14(23)2021 Nov 24.
Artigo em Inglês | MEDLINE | ID: mdl-34885312

RESUMO

The progressive collapse of buildings induces a variety of catastrophic consequences, such as casualties and property loss over the past few decades. The corner column is more prone to abnormal load events compared to the inner column and outer column; thus, it is easier to trigger progressive collapse. By considering the effects of floor slabs and adjacent bays on progressive collapse behavior, the pseudo-static loading method was used to study the progressive collapse test of a 1/3 scaled, one story, 2 × 2-bay cast-in-place reinforced concrete frame substructure under the removal condition of a corner column. The test results show that the flexural deformation principally concentrates upon the components of a directly affected part (DAP), and compressive arch actions are observed in members of the indirectly affected part (IAP). Moreover, the slab adjacent to the removed column and periphery elements contributes great resistance to a progressive collapse.

4.
ACS Omega ; 6(39): 25672-25679, 2021 Oct 05.
Artigo em Inglês | MEDLINE | ID: mdl-34632223

RESUMO

99Tc is a radioactive fission product, mainly in the form of TcO4 -, with good solubility and mobility in the environment. The development of effective and inexpensive materials to remove TcO4 - from nuclear industry wastewater or contaminated water is significant. Wood sawdust is a byproduct of the wood processing industry and is an abundant, low-cost, and sustainable material. The mesostructure of wood consists of numerous hollow cells that are joined endwise to form an interconnected channel matrix capable of rapid transfer of ions. Imidazolium-functionalized wood sawdust (IM-WS) was synthesized using natural wood sawdust by a two-step reaction. It has excellent properties of TcO4 -/ReO4 - adsorption including rapid adsorption dynamics (30 s to equilibrium), good adsorption stability (pH 3-9), high selectivity (adsorption of 45.4 Re % in 1000 times excess of NO3 - ions, 76.6 Re % in 6000 times excess of SO4 2- ions, and 92.2 Tc % in a simulated mixed solution; after adsorption, the concentration of TcO4 - decreased to 0.056 ppb from the initial concentration of 12.09 ppb in 1000 times excess of SO4 2-), and in particular low production costs. These characteristics give it great prospects for low-level radioactive wastewater treatment and environmental remediation.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...